Getting Started
42
Xerox
®
VersaLink
®
C400 Color Printer
User Guide
11.
If desired, set the printer as the default printer.
Note:
Before selecting
Share Printer
, contact your system administrator.
12.
To complete the installation, click
Finish
, then click
Close
.
Installing the Print Drivers for a Windows USB Printer
1.
Insert the
Software and Documentation disc
into the appropriate drive on your computer.
If the installer does not start automatically, navigate to the drive, and double-click the
Setup.exe
installer file.
2.
Click
Install Software
.
3.
At the License Agreement, select
I Agree
, then click
Next
.
4.
To install the printer support software, select
Software
, then click
Next
.
5.
In the Software and Documentation window, clear the check box for any undesired options.
6.
Click
Next
.
7.
To complete the installation, click
Finish
.
Installing the Drivers and Utilities for Macintosh OS X
1.
Insert the
Software and Documentation disc
into the appropriate drive on your computer.
2.
Open Xerox
®
Print Drivers 3.xx.x.dmg/.pkg as needed for your printer.
3.
To run Xerox
®
Print Drivers 3.xx.x.dmg/.pkg, double-click the appropriate file name.
4.
When prompted, click
Continue
.
5.
To accept the license agreement, click
I Agree
.
6.
To accept the current installation location, click
Install
, or select another location for the installation
files, then click
Install
.
7.
If prompted, enter your password, then click
OK
.
8.
From the list of discovered printers, select your printer, then click
Next
.
9.
If your printer does not appear in the list of discovered printers:
a.
Click the
Network Printer Icon
.
b.
Type the IP address of your printer, then click
Continue
.
c.
Select your printer in the list of discovered printers, then click
Continue
.
10.
If your printer was not detected, verify that the printer is on and that the Ethernet or USB cable is
connected properly.
11.
To accept the print queue message, click
OK
.
12.
Select or clear the
Set Printer as Default
and
Print a Test Page
check boxes.
13.
Click
Continue
, then click
Close
.
