Xerox VersaLink B415, User Manual

Page: 199 / 324

Configuring Paper Tray Settings
C O N F I G U R I N G D E D I C AT E D PA P E R T R AYS
The system administrator can set trays to Fully Adjustable mode or Dedicated mode. When a paper tray is set to
Fully Adjustable mode, you can change paper settings each time that you load the tray. When a paper tray is set to
Dedicated mode, the control panel prompts you to load a specific paper size, type, and color.
Depending on the configuration, your printer can have up to three optional 550-sheet standard paper trays.
Note: To configure tray settings, refer to the System Administrator Guide at www.xerox.com/office/
VLB415docs .
C H A N G I N G PA P E R S I Z E , T Y P E , A N D C O LO R
When a paper tray is set to Fully Adjustable mode, you can change paper settings each time that you load the tray.
When you close the tray, the control panel prompts you to set the paper size, type, and color of paper loaded.
When a paper tray is set to Dedicated mode, the control panel prompts you to load a specific paper size, type, and
color. If you move the guides to load a different paper size, the control panel displays an error message.
To configure the tray settings for Fully Adjustable or Dedicated mode, refer to Configuring Paper Tray Settings .
To set the paper size, type, or color when a tray is set to Fully Adjustable:
1. Open the paper tray, then load the required paper.
2. Close the tray.
3. At the control panel, select the correct paper size, type, and color:
• To select a new paper size, touch SSiizzee.
• To select a new paper type, touch TTyyppee.
• To select a new paper color, touch C Coolloorr.
4. To confirm the settings, touch C Coonnffiirrm m.
To set the paper size, type, or color when a tray is set to Dedicated, refer to Configuring Dedicated Paper Trays .
Xerox
®
VersaLink
®
B415 Multifunction Printer User Guide
199
Paper and Media