Xerox PrimeLink B9100, User Manual

Page: 80 / 484

Basic Scanning
The basic scanning procedure involves loading documents, selecting features, scanning the job, and identifying
where to store the scanned job.
Note: Users can scan up to 5000 impressions per job.
B A S I C S C A N P R OC E D U R E
To initiate a scan job:
1. Load the original document into the document feeder or onto the document glass. For details, refer to Loading
Documents .
2. At the control panel, press the SSeerrvviicceess H Hoom mee button.
3. Select a scan feature:
• EEm maaiill
• N Neettw woorrkk SSccaannnniinngg
• SSccaann ttoo PPC C
• SSttoorree ttoo U USSB B
• SSttoorree ttoo FFoollddeerr
• SSeenndd ffrroom m FFoollddeerr
• SSttoorree ttoo W WSSD D
Note: For details on these scan features, refer to Scan Methods .
4. Press the SSttaarrtt button.
LO A D I N G D O C U M E N T S
There are two methods to load documents:
• Document feeder: Use the document feeder to print or scan a single sheet or multiple sheets.
• Document glass: Use the document glass to print or scan a single sheet or a bound book.
1. Before you load the document, remove any paper clips and staples.
2. Load the document using the appropriate method:
• Document feeder: Load the document face up, then adjust the document guides to match the size of the
document that you loaded.
• Document glass: Load the document face down, position the document using the rulers and size guides,
then close the scanner cover.
Note: Users can scan up to 5000 impressions per job.
80
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
Scanning