Xerox PrimeLink B9100 User Manual Download Page 29

Page: 29 / 484

Consumable Information

Waarrnniinngg::

When handling cartridges containing ink, toner or fuser fluid, avoid skin or eye contact. Eye

contact can cause irritation and inflammation. Do not attempt to disassemble the cartridge, which can

increase the risk of skin or eye contact.

• Store all consumables in accordance with the instructions given on the package or container.

• Keep all consumables away from the reach of children.

• Never throw toner, print cartridges, or toner containers into an open flame.

For information on Xerox

supplies recycling programs, go to

www.xerox.com/recycling

Xerox

PrimeLink

B9100/B9110/B9125/B9136 Copier/Printer User Guide

Safety

Summary of Contents for PrimeLink B9100





































































































































































































































































































































































































































































































Search results

Summary of Contents for PrimeLink B9100

Reviews:

Related manuals for PrimeLink B9100

Brands by name

Popular brands

Xerox PrimeLink B9100, User Manual

Search results

Summary of Contents for PrimeLink B9100

Reviews:

Related manuals for PrimeLink B9100

Brands by name

Popular brands