Xerox Phaser EX7750, Job Management Manual

Page: 186 / 216

A
A-10 Basics of Imposition
This job can be made even more efficient by eliminating the gutters between cards,
allowing you to reduce significantly the number of cuts required to separate each card
from its neighbor. Defining zero-width gutters on a shared cut line in this manner is
called using a common blade for those cuts.
If you need to print business cards for several different clients, you could perform a
Gang Up Repeat printing job for each, but you might still wind up wasting paper and
time if the jobs do not fit easily into a simple multiple of sheets. A more efficient
approach is to print several jobs on a single sheet, and then print that sheet as many
times as required. The technique of printing multiple jobs on the same sheet is known
as Gang Up Unique. DocBuilder Pro provides both Gang Up Repeat and Gang Up
Unique.
Gang Up Unique layout