Xerox Phaser 7800 User Manual Download

Page: 131 / 336

Copying

Xerox

WorkCentre

7800/7800i Series Color Multifunction Printer 131

User Guide

Selecting the Paper Tray

Select a paper tray loaded with the desired paper to make copies on letterhead, colored paper, special

media, or different paper sizes.

To select the tray to use for ID card copies:
1.

Press the

Services Home

button, then touch

ID Card Copy

For Common Features, touch

Edit

For Paper Supply, touch the desired tray.

If the desired tray is not listed, touch

More

Touch the desired tray, then touch

Specifying the Original Type

You can use the Original Type option to specify the type of images to scan. The device uses this

information to optimize the image quality settings and produce the best quality output.

To specify the original type:
1.

Press the

Services Home

button, then touch

ID Card Copy

For Front Side Features or Back Side Features, touch

Edit

For Original Type, touch the content type for the original document.

Touch

Lightening or Darkening ID Card Copies

You can lighten or darken the copy for each side. Use the slider to lighten or darken the output for the

first side. After the first side is complete, use the slider again to lighten or darken the second side. Both

sides of the original are printed side by side, each using different lighten or darken settings.

To adjust the image:
1.

Press the

Services Home

button, then touch

ID Card Copy

For Front Side Features or Back Side Features, touch

Edit

To lighten or darken the image, for Lighten/Darken, adjust the slider up or down.

Touch

Summary of Contents for Phaser 7800

















































































































































































































































































































































Search results

Summary of Contents for Phaser 7800

Reviews:

Related manuals for Phaser 7800

Brands by name

Popular brands

Xerox Phaser 7800, User Manual

Search results

Summary of Contents for Phaser 7800

Reviews:

Related manuals for Phaser 7800

Brands by name

Popular brands