Xerox Phaser 6510 User Manual Download

Page: 51 / 236

Installation and Setup

Google Cloud Print

Google Cloud Print allows you to print documents that are stored in the cloud without using a print

driver.

Before you begin:

•

Set up a Google email account.

•

Configure the printer to use IPv4.

•

Configure Proxy Server settings as needed.

To configure Google Cloud Print:
1.

At your computer, open a Web browser. In the address field, type the IP address of the printer, then

press

Enter

Return

Note:

If you do not know the IP address for your printer, refer to

Finding the IP Address of Your

Printer

on page 30.

In the Embedded Web Server, click

Home

Connectivity

For Mobile Printing, click

Google Cloud Print

To enable Google Cloud Print, click the

Enable

toggle button.

Click

Restart the printer, then wait two minutes for the printer to connect.

Refresh your Web browser, then for Mobile Printing, click

Google Cloud Print

Click

Printer Registration

Click

Register

A printer registration page prints.

10.

To register the printer, in your Web browser, type the URL provided, or use your mobile phone to

scan the barcode.
Once the printer is registered, the word Registered appears in the printer status.

11.

To access the Google Cloud Print feature, in your Google account, click

Manage Your Printer

Note:

The default printer name appears in this format: Model name (MAC address).

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands