Xerox Phaser 6510 User Manual Download

Page: 127 / 236

Troubleshooting

Document Prints From Wrong Tray

Probable Causes

Solutions

Application and print driver have conflicting

tray selections.

Check the tray selected in the print driver.

Go to the page setup or printer settings of the application from

which you are printing.

Set the paper source to match the tray selected in the print

driver or set the paper source to Automatically Select.

Note:

To have the print driver select the tray, set the tray used as

the paper source to Auto Selection Enabled.

Automatic 2-Sided Printing Problems

Probable Causes

Solutions

Unsupported or incorrect paper.

Ensure that you are using a supported paper size and weight for

2-sided printing. Envelopes and labels cannot be used for 2-sided

printing. For details, refer to

Supported Standard Types and

Weights for Automatic 2-Sided Printing

on page 61.

Your printer model is not configured with

automatic 2-sided printing.

Ensure that your printer supports automatic 2-sided printing. For

details, refer to

Printer Configurations and Options

on page 216.

Incorrect setting.

In the print driver Paper/Output tab, select

Properties

2-Sided

Print

Printer is Making Unusual Noises

Probable Causes

Solutions

There is an obstruction or debris inside the

printer.

Power off the printer and remove the obstruction or debris. If you

cannot remove it, contact your Xerox representative.

Paper Tray Will Not Close

Probable Causes

Solutions

The paper tray does not fully close.

•

If the tray is extended for legal-size paper, the tray protrudes

when it is inserted into the printer. For details, refer to

Configuring Trays 1 or 2 for the Paper Length

on page 66.

•

Some debris or an object is blocking the tray.

•

The tray is hanging up on the table or shelf on which it is

located.

•

If the paper lift at the back of the tray is not locked down,

replace the tray.

Xerox

Phaser

6510 Color Printer 127

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands