Xerox Phaser 6510 User Manual Download

Page: 104 / 236

Maintenance

Cleaning the Printer

This section includes:

•

General Precautions ........................................................................................................................................................... 104

•

Cleaning the Exterior ......................................................................................................................................................... 105

•

Cleaning the Interior.......................................................................................................................................................... 105

General Precautions

CAUTION:

When cleaning your printer do not use organic or strong chemical solvents or aerosol

cleaners. Do not pour fluids directly into any area. Use supplies and cleaning materials only as

directed in this documentation.

WARNING:

Keep all cleaning materials out of the reach of children.

WARNING:

Do not use pressurized spray cleaning aids on or in the printer. Some pressurized

sprays contain explosive mixtures and are not suitable for use in electrical applications.

Use of pressurized spray cleaners increases the risk of fire and explosion.

WARNING:

Do not remove the covers or guards that are fastened with screws. You cannot

maintain or service any parts that are behind these covers and guards. Do not attempt any

maintenance procedure that is not described in the documentation supplied with your printer.

WARNING:

Internal parts of the printer can be hot. Use caution when doors and covers are open.

•

Do not place anything on top of the printer.

•

Do not leave the covers and doors open for any length of time, especially in well-lit places.

Light

exposure can damage the drum cartridges.

•

Do not open covers and doors during printing.

•

Do not tilt the printer while it is in use.

•

Do not touch the electrical contacts or gears. Doing so could damage the printer and cause the print

quality to deteriorate.

•

Ensure that any parts removed during cleaning are replaced before you plug in the printer.

104

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands