UNINET IMAGING INC.
•
XEROX
®
PHASER 6250 CARTRIDGE REMANUFACTURING INSTRUCTIONS
11. Wipe the seal opening and surroundings clean using iso-
propyl alcohol and a lint free cloth.
INSTALLING THE CLEARSEAL
®
ADHESIVE
12. Make sure that the new seal is being placed in its proper
position (shown) before applying.
NOTE
: Optional UniNet Clear Seal
®
universal adhesive for use in
Xerox Phaser
®
6200, 6250, OEM BK/C/M/Y toner cartridges
(UniNet part #10354).
13. Remove the adhesive backing of the Clearseal
®
and careful-
ly place over the opening as shown.
Apply pressure using your fingers to ensure a tight seal.
14. gently wrap the seal flap around the toner fill opening (as
shown) while you prepare to insert the cartridge.
This will ensure that the seal flap properly exits the opposite end
of the container.
© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.
w w w.
u n i n e t
i m a g i n g . c o m / t e c h n i c a l . a s p
11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • [email protected]
