Xerox Phaser 6128 MFP Service Manual Download Page 389

Page: 389 / 606

Phaser 6128MFP Service Manual

5-43

Print-Quality Troubleshooting

Lines or Streaks (from ADF)

There are lines or streaks on copies from the ADF.

Initial Actions

•

Check the document glass.

•

Ensure there are no debris on the document glass.

Troubleshooting Reference Table

Applicable Parts

Example Print

■

ADF Scanner Assembly, PL11.1.1

Troubleshooting Procedure Table

Step

Actions and Questions

Yes

1. Check the output document.

2. Are there lines or streaks on the

document?

Replace the
original
document.

Go to step 2.

Are there debris on the document
glass?

Clean the
document glass
using a lint-free
cloth.

Go to step 3.

Does the image quality improve?

Complete.

Go to step 4.

Are there scratches on the document
glass?

Replace the IIT
Sub-Assembly
(page 8-82).

Complete.

Scratch on Glass

Summary of Contents for Phaser 6128 MFP






























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Phaser 6128 MFP

Reviews:

Xerox Phaser 6128 MFP, Service Manual, Page: 389 / 606

Search results

Summary of Contents for Phaser 6128 MFP

Reviews: