Xerox Phaser 6128 MFP Service Manual Download Page 506

Page: 506 / 606

8-82

Phaser 6128MFP Service Manual

Service Parts Disassembly

IIT Sub-Assembly

PL 10.9.2

Caution

The Ferrite Core (PL 10.9.4) strung on the IIT Sub-Assembly ribbon cable is
extremely fragile.

1. Open the Front Cover.

2. Remove the Left Side Cover (page 8-17).

3. Remove the Outer Pole Cover (page 8-19).

4. Remove the Rear Cover (page 8-22).

5. Remove the Right Side Cover (page 8-23).

6. Remove the Top Cover (page 8-25).

7. Remove the Lower Scanner Cover (page 8-26).

8. Remove the ESS Shield (page 8-46).

9. Remove the Inner Pole Cover (page 8-20).

10. Release 2 hooks that secure of the FFC Cover to the chassis and remove the

cover.

s6128mfp-265

Summary of Contents for Phaser 6128 MFP






























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Phaser 6128 MFP

Reviews:

Brands by name

Popular brands

Xerox Phaser 6128 MFP, Service Manual

Search results

Summary of Contents for Phaser 6128 MFP

Reviews:

Brands by name

Popular brands