User Safety Summary
Phaser™ 4400 Laser Printer
11
■
Do not place the printer near a heat source.
■
Do not place the printer in direct sunlight.
■
Do not place the printer in line with the cold air flow from an air conditioning system.
■
Place the printer on a level, solid surface with adequate strength for the weight of the machine. The
base printer weight without any packaging materials is approximately 25 kg (55 pounds).
■
The printer is heavy, and must be lifted by two people. The illustration below shows the proper
technique for lifting the printer.
Note
Do not use the Multi-Purpose Tray or envelope feeder to lift the printer.
■
Follow the recommended procedure when moving the printer from one location to another. You
can find this procedure in the
Moving Guide
section located in the
Setup Guide
of the
Interactive
Documentation CD-ROM
.
■
Do not place any liquids on the printer.
Warning
Be careful when working in areas inside the printer identified with a warning symbol. These
areas may be very hot and could cause personal injury.
■
Wait 10-15 seconds between switching the printer off and on.
■
Keep hands, hair, neckties, etc., away from the exit and feed rollers.
While printing, follow these safety guidelines:
■
Do not remove the paper source tray that you have selected in the driver or front panel
■
Do not open the covers while printing.
■
Do not move the printer while printing.
25 kg
55 lbs.
P4400-93
