Xerox Phaser 3330, System Administrator Manual

Page: 14 / 92

Initial Setup
14 Xerox
®
Phaser
®
3330 Printer
System Administrator Guide
Accessing Administration and
Configuration Settings
You can access the administration and configuration settings from the control panel or from the
Properties tab in Xerox ® CentreWare ® Internet Services. The control panel consists of a display and
buttons that you press to control the functions available on the printer. Xerox ® CentreWare ® Internet
Services is the administration and configuration software installed on the embedded Web server in the
printer. It allows you to configure and administer the printer from a Web browser.
The administrator password is required when accessing locked settings in Xerox ® CentreWare ® Internet
Services or at the control panel. Most printer models have a default configuration that restricts access
to some settings. Access is restricted for settings on the Properties tab in Xerox ® CentreWare ® Internet
Services, and settings at the control panel.
Accessing the Control Panel as a System Administrator
1. At the printer control panel, press the
Menu
button.
2. Use the arrow buttons to navigate through the menus.
3. If your menu selection is locked, use the arrow buttons to enter the administrator password, then
press OK . The default password is 1111 .
4. Make other selections as needed.
Accessing Xerox ® CentreWare ® Internet Services as a System Administrator
Before you begin:
• Locate your printer IP address using the Configuration Report. For details, see Printing the
Configuration Report on page 16.
• Ensure that TCP/IP and HTTP are enabled. If you disabled either of these protocols, enable them at
the control panel before accessing Xerox ® CentreWare ® Internet Services.
• Many features in Xerox ® CentreWare ® Internet Services require an administrator user name and
password. The system administrator user name is admin and the default password is 1111 .
Accessing Xerox ® CentreWare ® Internet Services
At your computer, open a Web browser, in the address field, type the IP address of the printer, then press
Enter
or
Return
.