Xerox Phaser 3330, System Administrator Manual

Page: 16 / 92

Initial Setup
16 Xerox
®
Phaser
®
3330 Printer
System Administrator Guide
Initial Setup in Xerox ® CentreWare ®
Internet Services
Xerox ® CentreWare ® Internet Services is the administration and configuration software installed on the
embedded Web server in the printer. It allows you to configure and administer the printer from a Web
browser.
Before you begin:
• TCP/IP and HTTP must be enabled to access Xerox ® CentreWare ® Internet Services. If you disable
either of these services, enable them at the printer before accessing Xerox ® CentreWare ® Internet
Services.
• Locate your printer IP address using the Configuration Report.
Note: If your printer is locked, type the system administrator user name and password to access the
Properties tab. The administrator user name is
admin
and the default password is
1111
.
Accessing Xerox
®
CentreWare
®
Internet Services
At your computer, open a Web browser, in the address field, type the IP address of the printer, then press
Enter or Return .
Assigning a Printer Name and Location
The Description page displays the printer model information and product code or serial number. It also
provides a place to assign a name and location to the printer. Asset tags let you enter unique identifiers
for inventory management.
1.
In Xerox ® CentreWare ® Internet Services, click Properties > Description .
2. For Machine Name, type a name for the printer.
3. For Location, type the location of the printer.
4. For Customer Asset Tag Number and Xerox ® Asset Tag Number, type unique identifiers as needed.
5. To enter a physical location or address for the printer, in the Geo-Location field, enter the
geographic latitude and longitude coordinates in decimal form.
6. Click Apply .
Printing the Configuration Report
The Configuration Report lists all current settings of the printer. A configuration report prints at startup
by default.
1.
In Xerox ® CentreWare ® Internet Services, click Properties > Services .
2. Click Printing > Reports .
3. For Configuration Report, click Print .