Network Installation: Linux
Xerox® Phaser® 3052/3260
User Guide
30
16. Select
OK
.
17. The printer should now be listed in the Red Hat Linux Print System Manager window. Select the
lpd
menu.
18. Select
Restart lpd
.
19. Select the
PrintTool
menu.
20. Select
Exit
to close the program.
21. To allow access to the printer, edit the /etc/hosts table to list the client system.
22. Edit and create the /etc/hosts.lpd file to list the client system.
Dynamic Addressing
Procedure
Follow the steps in
Configure TCP/IP Settings Using CentreWare CentreWare Internet Services
, then
return to this page.
Important
: Highlight
BOOTP
in step 6.
Create the Print Queue
Follow the steps to
Create the Print Queue
.
Linux LPRng
Static Addressing
Information Checklist
Before starting, ensure that the following item is available and/or the task has been performed:
•
Linux operating system that supports PrintTool.
Procedure
Follow the steps in
Configure Static IPv4 Addressing Using the Machine User Interface
, then return to
this page.
Create the Print Queue
1.
Open the LPRngTool from the Linux Client.
2.
Select
Add
.
3.
In the Names area, enter a name for your print queue.
4.
The spool directory is the directory where print jobs are stored and is a subdirectory of
/var/spool/lpd. Add the name of the print queue to the end of the subdirectory path.
5.
In the Hostname/IP of Printer area, enter the hostname or IP Address of the Xerox machine.
6.
Select
OK
.
Summary of Contents for Phaser 3052NI
