For more information
on Xerox Nuvera
®
288
Digital Perfecting System, call toll-free
1-800-ASK-XEROX
or visit us on the web at
www.xerox.com
©2007 Xerox Corporation. All rights reserved. Xerox®, CentreWare®, DocuSP®, FreeFlow®, FreeFlow® Makeready, Xerox Nuvera®, VIPP®, FreeFlow logo and FreeFlow Process Manager are trademarks of Xerox Corporation in the U.S. and/or
other countries. Product appearance, configuration availability, build status and/or specifications are subject to change without notice. In support of Xerox’s environmental leadership goals, this model may contain some recycled components that
are reconditioned. The Xerox Total Satisfaction Guarantee applies to equipment under a Xerox warranty or a Full Service Maintenance Agreement and is subject to certain conditions. Opteron® is a registered trademark of AMD, Inc. Windows® is a
trademark of Microsoft Corporation. IBM® and Tivoli® are registered trademarks of IBM, Inc. CA and Unicenter® are registered trademarks of Computer Associates, Inc. Adobe® and PostScript® are registered trademarks of Adobe Systems, Inc.
Sun®, Sun Microsystems® and Solaris® are registered trademarks of Sun Microsystems, Inc. in the U.S. and/or other countries. 04/07.
Insertion Module
Insertion Module:
•
Trays per feed module: 4
•
Total 5,800 sheets per module (20 lb. bond/75 gsm)
•
Vacuum Air shuttle feed system
Capacity based on 20 lb. bond/75 gsm:
•
Tray 1: 1,600 sheets; 5.5" x 8" to 9" x 12.6"
(140 mm x 203 mm to 229 mm x 320 mm)
•
Tray 2: 3,100 sheets; 5.5" x 8" to 9" x 12.6"
(140 mm x 203 mm to 229 mm x 320 mm)
•
Tray 3 and 4: 550 sheets each; 7.2" x 8" to
12.6" x 18.5" (182 mm x 203 mm to
320 mm x 470 mm)
High Capacity Insertion Module:
•
Trays per feed module: 2
•
Total 3,200 sheets per module (20 lb. bond/75 gsm)
•
Vacuum Air shuttle feed system
Capacity based on 20 lb. bond/75 gsm:
•
Tray 1: 1,600 sheets; 7.2" x 8" to 12.6" x 18.5"
(182 mm x 203 mm to 320 mm x 470 mm)
•
Tray 2: 1,600 sheets; 7.2" x 8" to 12.6" x 18.5"
(182 mm x 203 mm to 320 mm x 470 mm)
Basic Finisher Module and
Basic Finisher Module Plus
•
Top tray: 250 sheet capacity (20 lb. bond/75 gsm)
Basic Finisher Module only
•
Stacker: 3,000 sheet capacity; offset between sets
or jobs
•
One or two staples, up to 100 sheets
•
Size: 5.5" x 8.5" (A5 and SRA3, papers > 12"
in cross process direction to top tray only)
•
Size: 7" x 10" to 12" x 18" (B5 to A3)
Finishing Transport Module
•
Top tray: 250 sheets (20 lb. bond/75 gsm)
•
Interface to in-line production finishing devices for
stacking, booklet making, perfect binding, punching
and thermal binding
•
Document Finishing Architecture (DFA) compliant
Electrical Requirements
•
Dual 187–240 VAC (Nominal), 50 Amp, 50/60 Hz
wall service for North America
– Printers, Feeders, Sheet Enhancement Module,
Insertion Module and Finisher Modules
(BFMs) included
– FTM and DFA Finishers will require additional power
•
Dual 187–240 VAC (Nominal), 30 Amp (one for
each Print Engine and Sheet Enhancement Module)
for Europe
– Feeders and Finisher Modules (BFMs) will require
additional power
– FTM and DFA Finishers will require additional power
•
Optional modules require standard 100–240 VAC,
50/60 Hz wall service
•
Power consumption: 1.316 kw (standby);
8.300 kw (running)
•
Consult the Installation Planning Guide for detailed
power requirements
Environmental Requirements
•
Temperature: 50° to 87° F (10° to 31° C)
•
Relative Humidity: 15% to 85%; wet bulb
limitation 77° F
•
Run Mode Heat Emissions: configuration dependent;
consult Installation Planning Guide
Certifications
•
Corporate Environmental Leadership Team policy of
maintaining a waste-free customer office
•
UL 60950-1, C-UL Approved for Canada CAN/CSA-
C222.2 No. 60950-1-3 and IEC 60951-1
Physical Characteristics
Sheet Feed and Insertion Module
Width
Depth
Height
Weight
31.7"
28"
44.6"
423 lbs.
805 mm
711.2 mm
1,133 mm
192 kg
Print Engine(s)
Width
Depth
Height
Weight
88"
29
"
61.6
"
1,600 lbs.*
2,229 mm
737 mm
1,565 mm
726 kg*
Sheet Enhancement Module
Width
Depth
Height
Weight
15"
28"
41.5
"
168 lbs.
381 mm
711.2 mm
1,054 mm
76.2 kg
Basic Finisher Module
Width
Depth
Height
Weight
33"
28"
44.6
"
369 lbs.
838 mm
711.2 mm
1,133 mm
167.4 kg
Basic Finisher Module Plus
Width
Depth
Height
Weight
49"
28"
44.6
"
560 lbs.
1,233 mm
711.2 mm
1,133 mm
254 kg
Finishing Transport Module
Width
Depth
Height
Weight
35.6"
28"
46.3"
319 lbs.
904.2 mm
711.2 mm
1,176 mm
145 kg
*With consumables loaded.
Please reference the specification sheets for
Xerox FreeFlow Makeready
®
, FreeFlow Process
Manager
™
and FreeFlow Web Services for
complete details.
610P728630
Xerox Nuvera
®
288
Digital Perfecting System
TOT
AL
SATISF
ACTION
GUARANTEE
