Environmental requirements
Supplies
Notes:
•
Expected dry ink yield is based on a 7 percent area
coverage, 8.5 by 11 inch or A4 paper, and varies
depending on area coverage of the application, as
well as the darkness settings of the printer.
•
Contact your local Xerox representative for supplies
ordering information.
Recommended
Minimum Maximum
Operating
temperature
72
o
+/- 4
o
F
22
o
+/- 2
o
C
50
o
F
10
o
C
85
o
F
29
o
C
Humidity
45% +/- 10% RH 30% RH 65% RH
Normal
Maximum
Altitude
Up to 6,000 feet /
1,830 m above
sea level
9,000 feet /
2,743 m above
sea level
Heat dissipation
Standby
Running
Printer
4,454 BTU/hr.
(Fuser on)
2,700 BTU/hr.
(Energy saver)
155/180: 32,770
BTU/hr
100/115/135:
28,140 BTU/hr.
Processor and
monitor (Sun
Blade
TM
)
SB 1000/2000: 1,100 BTU/hr.
SB 2500: 1,570 BTU/hr.
Reorder number
Expected yield
(Prints/carton)
Dry ink
US: 6R206
Europe: 6R90100
180,000
Dry ink waste
bottle
US: 93K460
Europe: 93K450
N/A
Developer
US: 5R161
Europe: 5R90095
1,000,000
Fuser agent
US: 8R2955
Europe: 8R90163
250,000
(1 bottle)
MICR dry ink
US: 6R819
180,000
MICR
developer
US: 5R573
600,000
•
In the U.S., call 1.800.822.2200 to order Xerox
supplies, including paper and other stocks.
Space requirements
Notes:
•
All the dimensions are taken from the system frame
to the nearest wall or obstruction, shown in inches
and centimeters, and are absolute minimums.
•
There should be a minimum of 78 inches / 198 cm
clearance from the floor to the nearest overhead
obstruction, throughout the entire area.
Depth
Width
Height
Controller
The following data is accurate for the Sun Blade
TM
1000/2000 and 2500 workstations, and is presented
as an example of typical space requirements for
workstations.
Stand
35.5
in.
90.2
cm
30 in.
76.2 cm
38.25 in.
97.2 cm
Processor: Sun
Blade
TM
1000/2000
19.3
in.
49
cm
8.2 in.
21 cm
17.75 in.
45.1 cm
Processor: Sun
Blade
TM
2500
25
in.
63.5
cm
10 in.
25.4 cm
19 in.
46.3 cm
Monitor
10 in.
25.4 cm
17 in.
43.2 cm
18.5 in.
47 cm
Printer
Space requirements (physical hardware and required
service area) for each of the printer configurations:
With inverter feeder/
stacker and 1 feeder/
stacker
114 in.
290 cm
223 in.
567 cm
With inverter feeder/
stacker and 2 feeder/
stackers
114 in.
290 cm
257 in.
652.8 cm
With inverter feeder/
stacker and 3 feeder/
stackers
114 in.
290 cm
288 in.
731 cm
With inverter feeder/
stacker, feeder/
stacker, and bypass
transport module
114 in.
290 cm
242 in.
615 cm
With inverter feeder/
stacker and 2 feeder/
stackers, and bypass
transport
114 in.
290 cm
276 in.
701 cm
•
The printing system must be installed in a fixed
location with minimum clearance space of 36 inches
/ 91.4 cm around all sides of each piece of
equipment for access by service personnel.
•
50 inches / 127 cm clearance space is required in
front of the printer.
•
The controller must be positioned within the line of
sight of the printer for safety purposes while the
equipment is being serviced.
•
Customer must use the Xerox-supplied stand for all
controller components. Space requirements for the
controller stand are 36 by 36 inches / 91 by 91 cm.
•
For proper operation, the printer must be perfectly
level. On floors less than two degrees out of level, a
leveling kit must be used to level the equipment.
The printer will not function properly on floors more
than two degrees out of level.
For additional space/configuration options, refer to the
Xerox DocuPrint 100/115/135/155/180 EPS
Installation Planning Guide
.
Electrical requirements
Notes:
•
Dedicated service is required for each component.
Each power cord must have a separate circuit.
•
Power requirements of the bypass transport are
satisfied by the printer module.
Controller
(47-63 Hz)
Printer
(60 Hz)
Cord #1
155/180
printer
(60 Hz)
Cord #2
Printer
(50 Hz)
Voltage
100-240
VAC
(1 phase)
120/208
VAC; or
120/240
VAC
(2 phase)
120/208
VAC; or
120/240
VAC
(2 phase)
380, 400,
415 VAC
(3 phase)
Recep-
tacle
NEMA part
number
5-15R
14-50R
14-30R
--
Power
consump-
tion (KVA)
Operating
mode
0.4
7.3 +
.75 per
middle
module
stacker
7.3+
.75 per
middle
module
stacker
Consult
your local
service
represent
ative
2004 by Xerox Corporation. All rights reserved.
Xerox DocuPrint
100/115/135/155/180 EPS
Customer Information
Quick Reference Card
Version 4.1
September 2004
701P42238
