Xerox N2025/N2825 User Manual Download

Page: 25 / 176

Printer Documentation

Chapter 1: Getting to Know Your Printer

❖

1-9

Printer Documentation

Your printer is packaged with documentation in both
printed form and on CD. There are two CDs:

•

Product CD

, which contains documentation and

printer drivers.

•

Printer Management Software CD

, which contains

various client software and the documentation for
them.

This section serves as a roadmap for the printed and CD
documentation.

Printed

Documentation

Your printer was packaged with the following pieces of
printed documentation:

•

Quick Install Guide

, which shows you how to get

your printer up and running.

•

User Guide

(this book), which provides you with the

basic information needed to use your printer. (More
detailed information is contained in the

System

Administrator Guide

on your Product CD.)

•

Quick Network Install Guide

, which briefly shows

you how to connect your printer to a network in your
specific environment. (More detailed Network/
Environment information is contained in the

Technical

Information Guide

on your Product CD.)

Summary of Contents for N2025/N2825

















































































































































































Search results

Summary of Contents for N2025/N2825

Reviews:

Related manuals for N2025/N2825

Brands by name

Popular brands

Xerox N2025/N2825, User Manual

Search results

Summary of Contents for N2025/N2825

Reviews:

Related manuals for N2025/N2825

Brands by name

Popular brands