2. Select
the
Maintenance
tab. You will be prompted for a
User ID
and
Password
. The
factory defaults are:
User Name
: admin
Password
: 1111
3. Select
Firmware Upgrade
.
4. Select
the
Machine Firmware Download
radio button.
5. Browse to the location where you unzipped the firmware upgrade files. Choose the file
WCM20I_Vxxx_smd.hd
6. Select
Upgrade
. A message will display confirming the upgrade, click
OK
. A pop-up will
display End of download. Click
OK
.
7. The WorkCentre M20/M20i will display a
Program Upgrade Please Wait…
message on
the User Interface.
8. After a few minutes the WorkCentre M20/M20i will reboot. Do not proceed until M20
reboots
9. Repeat above steps, but choose file
WCM20I_Vxxx_kit-emul.hd
in step 5.
10. Repeat above steps, but choose file
WCM20I_Vxxx_psiii.hd
in step 5.
11. After a few minutes the WorkCentre M20/M20i will reboot.
12. Print the System Data report and confirm the Firmware Version upgraded to the latest
version.
© 2009 Xerox Corporation. All Rights Reserved. Xerox ®, the sphere of connectivity design, and
WorkCentre® are trademarks of Xerox Corporation in the United States and/or other countries.
2
