Page 5
Infinite numbers on Mac OS X
When a job is sent from the Mac OS X printer driver, it is possible to enter number of copies
that range from 1 to infinity. This can cause unusually long processing of the job before the
job errors. To avoid this, select 1 copy when sending a job from Mac OS X, and then change
number of copies in Command WorkStation Job Properties.
Updating installable options with bi-directional communication
The installable HCF and other feeder options are not displayed as installed in either the
printer driver or Command WorkStation until bi-directional communication has been
disabled and then re-enabled manually in the printer driver on the Fiery EX4112/4127.
If bi-directional communication has been previously enabled, clear the Update Fiery Driver
When Opened and the Two-Way Communication checkboxes in the Accessories tab of the
printer driver.
To re-enable bi-direction communication, select the Two-Way Communication option in the
Accessories tab of the printer driver, type the Fiery EX4112/4127 IP address, select the
Update Fiery Driver When Opened option, and then click Update or restart the printer driver
to update the print options.
Updating the copier bitmap
The bitmap of the copier with installed options does not display appropriately until
bi-directional communication has been enabled manually in the printer driver on the
Fiery EX4112/4127. See
Updating installable options with bi-directional communication
above on how to disable and re-enable bi-directional communication in the printer driver.
Specifying page size
If you specify a page size in Command WorkStation Job Properties and then specify print size,
the page size display changes to the print size setting. However, the functionality for the page
size works as initially specified.
Text/Graphics Quality setting
The default setting for the Text/Graphics Quality option is incorrect in the Print Options
table. The default is Normal (not Auto).
