Page 19
Part Number: 45051581
11 Set Fasten Mode to Fold or Fold and Staple.
12 Choose Finishing 4 from the Feature Sets list.
13 Set Face-Down Printing to Face up.
14 Choose Finishing 1 from the Feature Sets list.
15 Set Booklet Maker to Saddle.
16 Choose Finishing 3 from the Feature Sets list.
17 Select the Imposition Reduction option.
18 Optionally, set one or more of the following options:
• Creep Adjustment (under Finishing 3)
• Centering Adjustment (under Finishing 2)
• Back Cover (under Finishing 2)
• Front Cover (under Finishing 2)
• Cover Source (under Finishing 2)
19 Click Print to submit the job for printing.
Centering Adjustment and Creep Adjustment and booklet printing
The Centering Adjustment and Creep Adjustment options apply only to booklet printing.
You must set the Booklet Maker option before you can set these options.
Direct connection
Although you are able to select Booklet Maker features when printing to the Direct
connection, the features are not actually supported. Selecting the options under these
circumstances will have no effect on the print job. The job prints without implementing
booklet or finishing features.
E-mail printing
SMTP services
You must enable SMTP services on your network’s e-mail server.
E-mail account password
E-mail printing does not work if the Fiery EXP4110 e-mail account does not have a
password. To receive e-mail print jobs, you must set a password for the e-mail account that
the Fiery EXP4110 is configured to use.
