Xerox Legacy 4110, Print Options

Page: 11 / 24

P
RINT
O
PTIONS
11
Collate
On/Off Specify how to output multiple-page/
multiple-copy jobs. For more information, see page 19 .
Copies
1-(maximum number of copies
depends on operating system) Specify the number of copies of a job you
want to print.
Create Master
None/1-15 To create a FreeForm master from this job,
specify a number to assign to the FreeForm
master file. For more information, see Variable Data
Printing .
Command WorkStation allows you to select
up to 100 FreeForm Masters. For more
information, see Command WorkStation
Help.
Creep Adjustment
Off/Normal/Thick Use this option to adjust images that may
shift from the center of the sheet in booklets.
Select Thick when you use thick media paper
for your print job.
Select Normal when you use normal media
paper for your print job
Creep can occur when booklet jobs have a
large number of pages or when booklet jobs
are printed on thick media. For more
information, see
page 20 .
This option is not supported for PCL.
Duplex
Off/Top-Top/Top-Bottom Specify whether a job is printed single-sided
or double-sided (duplex), by specifying the
orientation of printed images. For more information about duplex printing,
see
page 20 .
Face Down Printing
Face Down/Face Up Select Face Down to print your document on
the top of the sheet of paper.
Select Face Up to print your document on
the bottom of the sheet of paper (for
example, the document outputs from the
printer with the text facing down).
File Search Path
Define file search path
Some PPML and Creo VPS jobs do not
contain all the variable data job resources in a
single file. In these cases, specify the location
of the variable data job external resources
on a job-by-job basis, so that the
Fiery EXP4110 can access them. This option is available only in the printer
driver or Command WorkStation, Windows
Edition Job Overrides.
For more information about printing PPML
and Creo VPS jobs, see
Variable Data
Printing .
Folding
Off, Bi-fold, Booklet fold, Booklet fold and
staple, Z fold, Tri fold “Z”, Tri fold “C” Specify how to arrange the pages of the job
in special layouts for folding or cutting after
printing.
Option and settings
(default setting is underlined)
Description Requirements, constraints,
and information