Service Read Me
7
Quick Flash DVD Install Instructions
1.
Unique options, variation and detail can be found in the full
2.
Xerox FreeFlow Print Server Install Guide.
3.
The DVD loads all software: The OS, Xerox FreeFlow
4.
Print Server and Color Supplemental
5.
Make sure you have license available for this release
6.
on USB or CD-ROM. Insert the X86 Xerox FreeFlow
7.
Print Server for Full Software Image DVD into the
drive. Power on and the system will boot from the DVD drive for about 7 minutes.
8.
Select interface to bge0.
9.
Follow prompts for network settings. *Do not set DHCP here.
10.
Use static IP or other. To set DHCP, go into Network Settings after install
11.
and set "Networking Defaults button". This sets all
12.
DHCP values.
13.
Double-click the appropriate selection for Country or Region. For
14.
North America, select “geographic region”. Select the Time
15.
Zone, and then press <Next>.
16.
The Confirm Information screen is displayed. Ensure that the information
17.
is correct and then click <Confirm>. The Solaris Install JumpStart window opens.
18.
The software loads automatically from DVD for about 40 minutes. Once “Press enter to
reboot this DFE” appears, press <Enter>. The server will power down briefly and then power
on automatically.
19.
Press the eject button and remove the Full System Image disc once the system boots into the
initial BIOS screen. If the disc is not ejected then the software installation will repeat. If this
occurs press and hold the power button to power off the server. Press the power button to
power on the server and then eject the disc.
20.
The Console login prompt: appears for about 4 minutes. Do
21.
not type any input. WAIT 5+ minutes.
22.
Use License Mgr and add version license file and restart Xerox
23.
FreeFlow Print Server.
Please Reference the complete Xerox FreeFlow Print Server Installation Instruction Manual for
variations, options and additional information.
Summary of Contents for FreeFlow SP 3
Page 10: ......