Xerox Fiery EXP4110, Configuration And Setup

Page: 26 / 108

S
ETTING UP THE
F
IERY
EXP4110
FROM THE
C
ONTROL
P
ANEL
26
Functions menu
The Functions menu provides many of the options available from Command WorkStation.
Choose the following commands from this menu:
Print Pages Print system pages from the Fiery EXP4110. You can print the following pages from the
submenu that appears:
PS Test Page/PCL Test Page:
A Test Page allows you to confirm that the Fiery EXP4110 is
properly connected to the printer. Settings on the PS/PCL Test Page may include: Server
Name, and date and time the Test Page was printed.
Configuration:
Prints the Configuration page, which gives the current server and device
configuration. This page lists general information about the hardware and software
configuration of the Fiery EXP4110, the current options for all Setup settings, and the IP
address of the Fiery EXP4110.
Job Log:
Prints a log of the last 55 jobs.
PS Font List/PCL Font List:
Prints a list of all fonts currently on the Fiery EXP4110 hard
disk.
FTP Log:
Prints an FTP log listing recent FTP activity. This FTP log is useful to the network
administrator.
E-mail Log:
Prints a log listing recent e-mail activity. This E-mail log is useful to the network
administrator.
N
OTE
: To print the E-mail or FTP log, you must first enable the appropriate service. For
E-mail Services, see page 51 . For FTP printing, see page 54 ).
Suspend Printing Suspend communication between the Fiery EXP4110 and the printer. Use this command if
you want to interrupt the current Fiery EXP4110 job and use the printer to make copies or
print another job first. Jobs continue to process on the Fiery EXP4110. After you make the
copies, choose Resume Printing to continue printing jobs from the Fiery EXP4110.
Resume Printing Resume communication between the printer and the Fiery EXP4110 after you have finished
making copies or printing other jobs.