![background image](http://html1.mh-extra.com/html/xerox/ex-570/ex-570_configuration-and-setup_884989039.webp)
B
ACK
UP
AND
R
ESTORE
S
ETTINGS
39
T
O
BACK
UP
FROM
B
ACKUP
/R
ESTORE
1 In Configure > Server > Backup/Restore, click the Backup button.
Alternative procedures about using Backup/Restore from Command WorkStation are
available in Command WorkStation Help.
2 In the Backup dialog box, select settings and click Next.
3 Enter a file name, select a location, and click Next.
4 Click Finish.
T
O
RESTORE
FROM
B
ACKUP
/R
ESTORE
1 In Configure > Server > Backup/Restore, click the Restore button.
Alternative procedures about using Backup/Restore from Command WorkStation are
available in Command WorkStation Help.
2 In the Restore dialog box, browse to the configuration file that you created earlier and click
Next.
3 Select settings and click Next.
4 Click Finish.
Fiery System Restore
The EX/i Print Server system installer allows you to back up or restore the entire system to
recover from a system crash or a hard disk failure. After reinstalling system software, you can
create a new system backup partition of the EX/i Print Server, load a system recovery partition
to restore the EX/i Print Server to an earlier state, or use utilities to troubleshoot and
administer the EX/i Print Server.
After selecting a system language, you must select one of the following options.
•
New Installation:
Install new system software.
N
OTE
:
The EX/i Print Server is shipped with preinstalled system software. If you must reinstall
system software, contact a service technician.
•
Restore from backup or recovery partition:
Restore an earlier backup partition, or the
default EX/i Print Server configuration. If you have not created a backup partition, this
option allows only a recovery to the default configuration and “Restore from recovery
partition” is displayed.
•
Back up hard disk drive(s):
Back up the hard disk to external media, such as a USB flash
drive or network share location.
•
Platform Utilities:
Use the system installer for advanced procedures, such as erasing hard
disks, or use Windows Task Manager to administer the EX/i Print Server.