manualshive.com logo in svg

Xerox EX 570, Configuration And Setup

Share
Download
Xerox EX 570 Configuration And Setup Download Page 32

S

ETTING

 

UP

 

FROM

 

A

 C

LIENT

 C

OMPUTER

32

T

O

 

ACCESS

 C

ONFIGURE

 

FROM

 C

OMMAND

 W

ORK

S

TATION

1 In Command WorkStation, as Administrator, do one of the following:

• In the Server menu, click Configure.

• In Device Center, on the General or Users tabs, click Configure.

2 If the Fiery Setup dialog box displays, click Configure.

If you have not completed initial setup, you may want to click Fiery Setup Wizard instead. 
For more information, see 

“About Fiery Setup Wizard”

 on page 32.

If you use the Fiery Setup Wizard (from Command WorkStation or WebTools) and click 
Finish at the end of the wizard, the Fiery Setup dialog box does not display again in any 
location.

About Fiery Setup Wizard

Fiery Setup Wizard guides the initial setup to configure the EX/i Print Server for the print 
environment.

Fiery Setup Wizard is only available for initial setup and when you reinstall system software. If 
you use the Fiery Setup Wizard (from Command WorkStation or WebTools) and click Finish 
at the end of the wizard, the Fiery Setup dialog box does not display again in any location.

The Fiery Setup Wizard guides you through the following procedure:

1 Choose a default language.

2 Specify regional settings.

3 Specify server settings.

4 Choose a print environment configuration.

A print environment configuration contains standard setup options for a particular print 
environment. You can choose from one of the following configurations that best fit your print 
environment:

• Graphic Arts & Proofing

• Office & Workgroup

• Production

• Transactional

You can also choose to use EX/i Print Server factory default settings for your print 
environment instead of choosing a print environment configuration.

5 Configure setup options for a chosen print environment.

After completing Fiery Setup Wizard, you can make additional changes to the EX/i Print 
Server in Configure.

Summary of Contents for EX 570






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands