Xerox DP N24, System Administrator Manual, Page: 320 / 336

Output Selection
F-6
❖
DP N24, N32 and N40 System Administrator Guide
Output Selection
Table F.4 lists the output destinations supported by the DP N40
along with the PCL commands and PJL values to select them. (The
values listed in the PJL column are the settings associated with the
PJL “OUTBIN” variable.)
Table F.4 Output selection
Destination PCL Command
1
PJL Value for variable “OUTBIN”
Automatic (no request) E
c
&l0G
Top (Face-down Bin) E
c
&l1G FACEDOWN or UPPER
Face-Up Bin E
c
&l2G FACEUP or LOWER or OPTIONALOUTPUTBIN1
Bin 1 (Mailbox) E
c
&l4G OPTIONALOUTPUTBIN2
Bin 2 (Mailbox) E
c
&l5G OPTIONALOUTPUTBIN3
Bin 3 (Mailbox) E
c
&l6G OPTIONALOUTPUTBIN4
Bin 4 (Mailbox) E
c
&l7G OPTIONALOUTPUTBIN5
Bin 5 (Mailbox) E
c
&l8G OPTIONALOUTPUTBIN6
Bin 6 (Mailbox) E
c
&l9G OPTIONALOUTPUTBIN7
Bin 7 (Mailbox) E
c
&l10G OPTIONALOUTPUTBIN8
Bin 8 (Mailbox) E
c
&l11G OPTIONALOUTPUTBIN9
Bin 9 (Mailbox) E
c
&l12G OPTIONALOUTPUTBIN10
Bin 10 (Mailbox) E
c
&l13G OPTIONALOUTPUTBIN11
SORTER E
c
&l99G SORTER
1
The character following the “&” in the command string is the lower case character “L.”