Xerox DocuPrint Network Printer Series Guide, Manual

Page: 33 / 72

POSTSCRIPT
XEROX DOCUPRINT NPS GUIDE TO USING PAGE DESCRIPTION LANGUAGES 2-7
masters using cexec . Usage of cexec is typically hidden by the
encryption of eexec .
LaserWriter defines other entries in the System Dictionary that
are specific to its device characteristics, such as extra operators
that deal with the hard disk. Such operators are not part of the
standard as defined in the
PostScript Language Reference
Manual , second edition, and are not implemented on DocuPrint
NPS.
User Dict
User dictionary entries that are implemented include:
DocuPrint implements print-level commands provided by the client
print command. PostScript-level print commands are ignored.
The following operators, which are specific to the LaserWriter
implementation of PostScript, are defined with null functionality in
DocuPrint NPS.
The DocuPrint NPS User Dictionary contains the following definitions
of values and procedures that mimic the LaserWriter II NTX but are
not used by DocuPrint:
Note: #copies may be used to set the number of copies prior to
the first showpage of a job.
Server Dict
Server Dictionary operators that are implemented include:
With the exception of exitserver (see the “Printer Controller” section
of this chapter), these operators allow you to bypass the save or
restore context around each PostScript job. These changes can be
reset only by stopping and restarting job processing.
cleardictstact {countdictstack 2 sub {end}repeat}
startpage Prints a startup page
start {(Init.ps)run}
a4 legaltray
a4small letter
a4tray lettersmall
b5 lettertray
b5tray note
legal
aa xu
xs xv
xt xw
#copies
dexch exitserver
exchdef fontname