Xerox DocuPrint N3225, System Administrator Manual

Page: 159 / 325

Downloading Fonts, Forms and Macros
Chapter 3: Using the Hard Disk Drive and Flash Memory
❖
3-5
FSDOWNLOAD
Command
The FSDOWNLOAD command is used to download fonts
or macros to the printer’s file system. If a file with the
same name exists, the downloaded file overwrites it.
Syntax @PJL FSDOWNLOAD FORMAT:BINARY [SIZE=int] [NAME = “ pathname ”] [<CR>]
<LF><binary data><ESC>%-12345X
Parameters
Parameter Functional Range Default
SIZE= integer 0 to 2
31
- 1 N/A
NAME=”
pathname
” ASCII 01 thru 255 N/A
SIZE
=
integer
— The size variable indicates the number of bytes in the file to be
downloaded. The size indicates the number of bytes immediately following the <LF> to
the next UEL command.
NAME = “pathname” — where “ pathname ” = 0:\pcl\fonts\<fontname> to download a
font named “fontname” to the printer or = 0:\pcl\macros\<macroname> to download
a macro named “macroname” to the printer. <
fontname >/< macroname > can be any
combination of up to 40 alphanumeric characters.
<
binary data
> — This is the binary file data to be downloaded, such as font files and
macro data.
Use of 1 rather than 0 in the “pathname” will download the font or macro to the
Flash memory rather than to the hard drive.