19
General
2 Sided Print
If the duplex unit is attached to the printer, it can automatically print on both sides of paper.
When using the 2-sided print, select [Flip on Long Edge] or [Flip on Short Edge] to match
to edge to bind. Selecting [Flip on Long Edge] or [Flip on Short Edge] pivots the page
images along either the long or short edge of the paper. However, the orientation of the top
and bottom of the image does not change. The default is [1 Sided Print].
Important
• The paper sizes or types available with 2-sided print are as follows:
Paper size: A4, B5(JIS), Letter, Legal, 8.5x13” (Legal13”), 7.25x10.5” (Executive)
Paper type: Plain, Bond, Coated 1 (60-105g/m2)
• Even if the duplex module (option) is not mounted, duplex printing can be specified. However, doing this
causes a printer error, and the job you specified will not be printed.
The “Invalid job Press Set” message will be displayed on the control panel of the printer. Press the
<Eject/Set> button.
Collated
Selecting [On] prints a multiple-page document on the basis of the copy set. For example,
if you are printing the multiple-page document, the output is 1,2,3,...1,2,3.... When
selecting [Off] (default), the output is 1,1,1...2,2,2...3,3,3....
Note
• If there is a collate function on the application, documents may not be collated even if this item is [On]. If
this happens, set collate on the application.
Media Size
Specify the paper size to be used. The available options are as follows:
[A4 (210x297mm)], [B5 (182x257mm)], [A5 (148x210mm)], [Japanese Postcard],
[Letter (8.5x11”)], [Legal (8.5x14”)], [Folio (8.5x13”)], [Executive(7.25x10.5”)]
Note
• The default is [A4 (210 x 297 mm)] or [Letter (8.5 x 11")], according to the CUPS browser setting of each
distributions.
Options Installed
Memory Capacity
Set the memory capacity of the printer.
Select [64MB] (default), [128MB], [192MB], [320MB], or [576MB] depending on the
additional memory mounted on this printer.
Optional Tray Module
Set the configuration of the paper tray (optional) to match the optional accessory mounted
on this printer. The available options are as follows:
Select [Not Available] (default), [250 Sheet Feeder], [500 Sheet Feeder], or
[250+500 Sheet Feeder].
