2
Installation Procedure
The ROM of the Korean font kit goes into the controller board right underneath a network
expansion card. If your printer has a network expansion card, remove it to get an access to
the ROM slot. For information on how to uninstall/re-install the network expansion card,
refer to the installation guide provided for the card.
Follow these steps when installing the Korean font ROM to the printer:
1.
Switch the power off by pressing the power
switch located on the left side of the printer
to the <O> position.
Unplug the power cord from the power
outlet and the printer.
2.
Loosen the two screws that secure the rear
cover to the printer.
3.
Pull the rear cover forward and remove it
from the printer.
Network
expansion card
Font ROM
Korean.fm Page 2 Tuesday, August 22, 2006 8:53 AM
