Xerox DocuPrint C2255, User Manual

Page: 257 / 322

7.10 Adjusting Tone Density
257
Determining the Density Values
The density values are calculated by comparing the [Calibration Chart] to the Color Sample.
Decide which blocks on the Calibration Chart most closely match the densities of the Color
Sample. Make a note of the value (-6 to +6) for each color.
When determining density values, also use the instructions provided on the Color Sample.
Note
• The factory default setting for the density values of all colors is “0”.
1. Fold the Calibration Chart along the guide (dotted line) of the color to be adjusted.
2. Align the density area to be adjusted on the Calibration Chart with that on the Color
Sample.
(Example: low density (L); when adjusting the low density area, align the “Low” on the
Calibration Chart with the “Low” on the Color Sample.)
Color Sample
Calibration Chart