Adjusting Copying Options
6-6
Adjusting the Sharpness
To adjust the sharpness of an image:
1.
On the printer console, press the
Copy
button.
2.
Select
Sharpness
, and then press the
OK
button.
3.
Press the
Up Arrow
or
Down Arrow
button to select the sharpness setting.
■
Sharper
: Makes the copy softer than the original.
■
Normal
: Makes the copy sharpness the same as the original.
■
Softer
: Makes the copy sharper than the original.
Note:
The factory default is Normal.
4.
Press the
OK
button to apply the setting.
Adjusting the Color Saturation
To deepen or lighten the overall color levels of your copies:
1.
On the printer console, press the
Copy
button.
2.
Select
Color Saturation
, and then press the
OK
button.
3.
Press the
Up Arrow
or
Down Arrow
button to adjust the level of color saturation.
■
Higher
: Increases the color saturation to deepen the color of the copy.
■
Normal
: When set to Normal, the color saturation is the same as the original.
■
Lower
: Decreases the color saturation to lighten the color of the copy.
Note:
The factory default is Normal.
4.
Press the
OK
button to apply the setting.
See also:
