XEROX
1999, 2000 by Xerox Corporation. All rights reserved.
Xerox DocuPrint
92C NPS
Customer Information
Quick Reference Card
The Xerox DocuPrint 92C NPS is a highlight color printing
system. Refer to this card for information on the Xerox
DocuPrint 92C NPS.
Version 7.1
August 2000
721P87521
Electrical requirements
•
System Control Module (60 Hz):
– 115 or 220 VAC
– 15 amp service (for 115 VAC, NEMA 5-15R or
ANSI C73, 11R)
– 0.4 KVA rating
•
System Control Module (50 Hz):
– 100-240 VAC +/- 10%
– 15 amp service
(power connection per local codes/regulations)
– 0.4 KVA rating
•
Printer Module (60 Hz):
– 120/208 or 120/240 VAC
– 30 amp service (NEMA 14-30R)
– 5.5 KVA rating (Operating mode)
•
Printer Module, DELTA configuration (50 Hz):
– 220, 230, 240 VAC
– 30 amp service
(power connection per local codes/regulations)
– 5.5 KVA rating (Operating mode)
Submitting 600 dpi jobs
To submit 600 dpi jobs on your Xerox DocuPrint 92C NPS, use one of
the job submission methods described below.
Note:
These methods are required only until the Common Client 2.3
driver becomes available.
1. Install the revised 4890 PostScript Printer Description (PPD) file
from your NPS 1.6.1 system with the existing Common Client 2.1
driver (refer to the
Guide to Submitting Jobs from the Client
). This
PPD file allows both models 4890 and 92C to utilize the 4890
driver with no limitation.
2. Install the Xerox INF file for use with the Microsoft PScript driver
(refer to the
Guide to Submitting Jobs from the Client
), then use
the native driver with the new PPD file (enhanced for DocuPrint
92C NPS).
Note:
Use this method when native 600 dpi is required but
access to Xerox job ticketing is not required.
3. Install the Xerox INF file for use with the Microsoft PScript driver
(refer to the
Guide to Submitting Jobs from the Client
), then use
the native driver with the new PPD file and generate a PostScript
(.ps) file. Finally, use DigiPath QuickPrint job submission client to
submit your job. The job will be submitted to a 4890 printer.
Note:
Use this method when both native 600 dpi and Xerox job
ticketing are required.
Supplies
Notes:
•
Expected dry ink yield is based on a 5% black and 1.5% color
area coverage. This yield will vary depending on area coverage of
the application and darkness settings of the printer.
•
Use only dry ink that is specified for use in the DocuPrint 92C
printer even when printing non-colored jobs.
•
Purchase of colored dry ink is required to operate your DocuPrint
92C NPS highlight color system.
A small amount of colored dry ink is consumed even when
printing non-colored jobs, except in the Black Executive mode.
For further information on this topic, consult your local Xerox
service representative.
Reference material
•
Refer to the
Helpful Facts About Paper
to help in selection of
preprinted forms, perforated stock and labels.
•
Refer to the
Highlight Color in Business Documents -- a Practical
Guide
for information on how to leverage the business benefits of
HLC documents.
Xerox Color
Reorder
# (US)
Reorder
# (XE)
Cartridges
per Carton
Expected
Yield
(Prints/
Carton)
Dry Ink, Black
6R296
6R90193
6
180,000
Dry Ink, Red
6R297
6R90194
3
270,000
Dry Ink, Blue
6R754
6R90225
3
270,000
Dry Ink, Green
6R299
6R90196
3
270,000
Dry Ink, Cyan
6R755
6R90226
3
270,000
Dry Ink, Magenta 6R816
6R90227
3
270,000
Dry Ink, Royal
6R826
6R90232
3
270,000
Dry Ink, Cardinal
6R825
6R90231
3
270,000
Dry Ink, Violet
6R828
6R90243
3
270,000
Dry Ink, Ruby
6R827
6R90242
3
270,000
Dry Ink, Brown
6R842
6R90245
3
270,000
Fuser Lubricant
8R983
8R983
2 Tubes
240,000
Stitcher Wire
8R1174
8R1174
1 Reel
32,000
Staples
