Xerox DocuPrint 180 NPS Series, Troubleshooting Manual

Page: 42 / 62

USING SAMPLE DOCUMENTS
6-2 XEROX DOCUPRINT 96/4635/180 NPS TROUBLESHOOTING GUIDE
Example Listing sample documents:
Print Sample Document
Use the Print Sample Document command to print the sample
document you select from the list. If you do not enter arguments with
the command, the system prompts you for them.
PS-op>
list sample documents
Available Sample Documents are:
100 pages
2pages
4pages
50pages
dfaq0397
dpps
FontDir
HC
iso8859-1
maze
mesh50
mesh100
pclfont
shapes
StdPCLFonts
StdPSFonts
testgray
testxerox
worm
XeroxSpiral
XGFGoldenJob
XGFLicenseRequestForm
XRXGPJ1
XRXGPJ2
Access level Administrator or operator
Syntax Print Sample Document <Document> <Copies> <Plex> <Staple>
<Resolution> <Media> <Stacker group>
Arguments <Document>
Indicates the name of the sample document you want to print.
The name is case-sensitive.
<Copies>
Indicates the number of copies of the sample document you
want to print.
<Plex>
Indicates whether the sample document prints on one side of
each page or on both sides of each page. Specify “simplex,”
“duplex,” or “tumbleduplex.”
<Staple>
Indicates whether the sample document is stapled after it prints.
Specify “Staple” or “DontStaple”
<Resolution>
Indicates the printing resolution.