Xerox DocuPrint 155, Troubleshooting Manual

Page: 53 / 68

Troubleshooting Guide 6-1
6. Optimizing print quality
This chapter discusses methods of checking and improving print
quality.
NOTE: One way to test print quality is to print a sample
document. For information on printing sample documents, refer
to the Guide to Configuring and Managing the System.
Installing the custom transfer assist blade
If you use nonstandard paper sizes, you should install the
custom transfer assist blade to ensure good print quality.
CAUTION
The custom transfer assist blade comes as a kit with detailed
instructions. Be sure to follow the instructions carefully.
To prevent damage to the printer, have your service
representative show you how to customize and install a custom
transfer assist blade for the first time.
You must use the standard transfer assist blade with standard
paper of the following sizes:
• In U.S. markets
– 11.1—11.4 inches (282—290 mm)
– 11.8—12.1 inches (300—307 mm)
– 13—13.5 inches (330—343 mm)
• In non-U.S. markets
– 11.1—11.4 inches (282—290 mm)
– 11.8—12.1 inches (300—307 mm)
NOTE: With these paper sizes, transfer efficiency may be
reduced.