Changing print modes
3-4
NPS/IPS Extension Operations Guide
Changing from NPS/IPS print mode to EPS print mode
Use the following procedure to change operating modes of the
printing system from NPS/IPS mode to EPS mode.
NOTE: You must be logged in the system as either an Operator
or Administrator to switch between NPS/IPS and EPS modes.
1. Stop printing of any pending jobs, using one of the following
procedures:
•
In command line mode: On the command line, enter
stop printing
.
•
In GUI mode: Click the red [Stop Printing] button in the
upper-right corner of the main window.
2. View the document list and wait for any document currently
pending or being printed to complete. To view the list, do one
of the following:
•
In command line mode: Enter
list documents
.
•
In GUI mode: Click the [Job Manager] icon to display the
Job Manager window.
3. From the Workspace background menu, select [Start EPS
Printing].
4. On the confirmation window that appears, click [Confirm].
Within a few minutes, the printing system reboots and starts
in EPS print mode, displaying the graphical user interface.
