background image

DOCUSP 3.x

20

XEROX DOCUMENT SERVICES PLATFORM SERIES

GETTING READY FOR THE DOCUSP INSTALLATION

W-8: SNMP Gateway installation worksheet

If the customer is planning on using the SNMP Gateway, fill out
this worksheet.

Data Elements

Customer Value

Enabled

YES     NO

Printer ID (OID)
(See the Printer OID table)
Trap Client Lifetime
Trap Client Interval
Trap Polling Time
Packet Wait Time

10

(not to be changed)

Number of Trap Parameters

6

Read Community String
Write Community String
Trap Community String
Domain

UDP

IP Address or Port Number
Printer Alert

ON    OFF

Cold Start

ON    OFF

Warm Start

ON    OFF

Link Up

ON    OFF

Link Down

ON    OFF

Authentication Failure

ON    OFF

Trap SNMP Version

SNMPV1c

W-8 Data elements

Enabled: 

The System Administrator can enable or disable the

SNMP gateway as desired.

Printer ID (OID):

  Select the appropriate identification string

based on the model of the printer being installed from the table
below.  This string must be entered exactly as there is no
validation of the string in case of an error.

Trap client lifetime:

 The Trap Client Lifetime determines how

long an active trap will live. Enter a value in seconds, such as
300 seconds.

NOTE:  SNMP keeps a list of traps that are currently active. 
Active traps that exist longer than the Trap Client Lifetime value
will be removed from the active list.

Trap client interval:

 The Trap Client Interval determines when

SNMP will check for trap expiration.  For example, if the value is
60, every 60 seconds SNMP will check to remove any traps (as
appropriate) from the active list.  Enter a value in seconds.

Summary of Contents for Document Services Platform Series




























Reviews: