Xerox document centre285 series, User Manual

Page: 135 / 209

5.3 Common Menu Items
123
Mode
M
e
nu and Common Menu
5
Ethernet Sets the transmission speed/connector type of the Ethernet interface. This
menu item is available only when the interface board for Token Ring has not
been installed. The candidate values are:
•
Auto (default)
100BASE-TX or 10BASE-T will be interchanged automatically.
• 100BASE-TX
Select this when you want to fix the value at 100BASE-TX for use.
•
10BASE-T
Select this when you want to fix the value at 10BASE-T for use.
Token Ring The following items will be displayed when the interface board for Token Ring
has been installed:
Transmit Rate
Sets the transmit rate. The candidate values are:
•
Auto (default)
•
4M
• 16M
• 100M
Max Packet Size
Sets the maximum packet size. The candidate values are:
• 1500B (default)
•
2088B
•
4472B
• 8232B
Source Routing
Sets whether to enable source routing. The candidate values are:
• Off (default)
• On
When it is set to On, transmission among different rings connected by bridges
can be carried out.
Menu item Explanation