DOCUSP 3.74
5-4
XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
Required levels of expertise
The DSPERU tool was designed to be easy to use. However,
some assumptions have been made regarding the level of
knowledge required to perform various setup, backup, and
recovery tasks.
Setting up the tool for use on a system and performing a
recovery requires some level of comfort with entering UNIX
commands. The commands are not complex, but if you have no
UNIX experience, you may require assistance initially.
To initiate a backup, you must know your system root password
and how to open a Terminal window.
The following levels of expertise are required to perform the
necessary functions:
·
Set up DSPERU tool on system: Customer systems
administrator, Xerox system analyst or service
representative.
·
Initiate DSPERU backup: Printer operator, customer system
administrator, Xerox analyst or service representative
·
Initiate DSPERU recovery: Customer system administrator,
Xerox system analyst or service representative
Installing DSPERU on your DocuSP controller
1. Insert the diskette containing the scripts into the diskette
drive.
2. Open a Terminal window and logon as root user.
3. Enter
volcheck
to mount the diskette.
4. Enter
sh /floppy/floppy0/dsperu_setup
to launch the setup
script.
5. Eject the diskette by entering
cd; eject
.
The setup script does the following:
·
Creates the directory
/export/home/xrxusr/backup
.
·
Copies
the
btt
file to the
/export/home/xrxusr
directory.
·
Copies
the
dsp_backup_run
and
dsp_dump
files to the
backup subdirectory.
If DSPERU was previously set up on your system, an error
message may be displayed when it tries to perform the setup
again.
If the files and directory listed above are present, the installation
was successful.
