Xerox Document Binder 120-D (DB120-D)
Performance Specifications
Listed below are the Performance Specifications for the
Document Binder 120-D.
Binding
US Specifications
European Specifications
Paper Size / Weight
8.5” x 11” (216 x 279 mm)
Note: A conversion kit allowing for usage
of A4 / 115V is available. These kits
would be applicable on some specific
markets and special applications.
20 lbs (75 gsm) – 32 lbs index (120 gsm)
bond and flush cut tabs.
Weights above 32 lbs. (120 gsm) should
be used only as dividers or inserts.
A4 (210 x 297 mm)
Note: A conversion kit allowing for usage
of Letter size / 230V is available. These
kits would be applicable on some specific
markets and special applications.
20 lbs (75 gsm) – 32 lbs index (120 gsm)
bond and flush cut tabs.
Weights above 32 lbs. (120 gsm) should
be used only as dividers or inserts.
Cover Sizes
Spine Width / Approx. # of
sheets
Based on 20 lbs (75 gsm) paper
1/16” / 2 – 15 sheets (
∗
)
1/8” / 16 – 30 sheets
1/4" / 31 – 60 sheets
3/8” / 61 – 90 sheets
1/2" / 91 – 120 sheets
(
∗
) Minimum sheets for 1/16” dependent
on connected printer. In walk-up mode
however, 1 – 15 sheets are allowed
regardless of connected printer.
Based on 80 gsm paper
1.5 mm / 2 – 13 sheets (
∗
)
3 mm / 14 – 28 sheets
6 mm / 29 – 55 sheets
9 mm / 56 – 84 sheets
13 mm / 85 – 120 sheets
(
∗
) Minimum sheets for 1.5 mm dependent
on connected printer. In walk-up mode
however, 1 – 15 sheets are allowed
regardless of connected printer.
Tray Capacity
Input Tray:
2 pre-loaded cassettes
containing 150 covers each
Output Tray:
20 – 100 finished sets
depending on spine width.
Input Tray:
2 pre-loaded cassettes
containing 150 covers each
Output Tray:
20 – 100 finished sets
depending on spine width.
Warm-up Time
Approx. 2 minutes
Approx. 2 minutes
Input Height
34” (860 mm) and 40.2” (1021 mm)
34” (860 mm) and 40.2” (1021 mm)
1-2
