Using the Fiery X12/Fiery X40 Advanced Controller Interface Kit
1
Introduction
This document describes how to install the Advanced Controller Interface kit upgrade in
order to connect a monitor, keyboard, and mouse to a Fiery X12 or Fiery X40. In
addition to connecting the monitor, keyboard, and mouse to the back of the Fiery X12/
Fiery X40 you will also need to replace the BIOS chip installed on the motherboard.
Along with this document, this kit includes:
• Advanced Controller Interface BIOS chip
(includes an additional socket mount in case pins are bent during installation)
• Monitor, keyboard, and mouse (provided separately)
In order to
use t
his kit, you need to:
• Access the Service menu and select Install Option
• Shut down the Fiery X12/Fiery X40 and remove the side panel
• Replace the BIOS chip on the motherboard
• Reassemble the Fiery X12/Fiery X40
• Connect the monitor, keyboard, and mouse to the back of the Fiery X12/Fiery X40
• Power on the system
N
OTE
:
If you are installing more than one kit that required a BIOS upgrade, you will need
to go through the BIOS upgrade procedure for each BIOS chip included. The order in
which you install and upgrade the BIOS chips does not matter.
