Xerox DocuCentre SC2020, User Manual

Page: 184 / 322

Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
181
Values:
Output Settings
Purpose: To configure settings concerning output from the device.
Default Paper Size
Purpose: To specify the default paper size.
Values:
* The default for [Default Paper Size] varies depending on region-specific factory default.
Print ID
Purpose: To specify a location where the user ID is printed.
Values:
Note: When you print on DL size paper, a part of the user ID may not be printed correctly.
Print Text
Purpose: To specify whether the device outputs PDL data, which is not supported by the device, as text
when the device receives it. Text data is printed on A4 or Letter size paper.
Off Disables the fault time-out.
On 60 sec Sets the amount of time the device
waits before canceling a job that stops
abnormally.
3–300 sec
A4
*
8.5 x 11
*
Off Does not print the user ID.
Top Left Prints the user ID on the top left of the page.
Top Right Prints the user ID on the top right of the page.
Bottom Left Prints the user ID on the bottom left of the page.
Bottom Right Prints the user ID on the bottom right of the page.