SERVICING
Integrated Fiery Color Server for Xerox Color 550 Production Printer
3-4
7/09
CONFIGURATION TRAINING GUIDE
Copier mode DHCP Setup
To connect the Integrated Fiery Color Server to the Xerox Color 550
Production Printer, the Systems settings network protocol must be
set to DHCP for the Fiery to properly print to the copier. The below
steps describe the procedure for setting the copier protocol to
DHCP.
1. Press
the
Log In / Out
button.
2. Enter the System Administrator password.
3. Press
the
Machine Status
button on the copier panel.
4. Select
Tools
.
5. Select
System Settings
.
6. Select
Connectivity & Network Setup
.
7. Select
Protocol Settings
.
8. Set item 2
TCP/IP – IP Mode
to
IPv4 Mode
.
a. To change IP Mode, select
IP Mode
.
b. Press
the
Change Setting
button
c. Select
IPv4 Mode
.
9. Set item 3
IPv4 – IP Address Resolution
to
DHCP
.
a. To change IP Address Resolution, select
IP Address
Resolution
.
b. Press
the
Change Setting
button
c. Select
DHCP
.
10. Select the
Close
button.