• A
Allw
waayyss SShhoow
w: This option shows the paper confirmation prompt on the control panel touch screen until the
user dismisses it.
• D
Deellaayyeedd C
Coonnffiirrm
maattiioonn: This option shows the paper confirmation prompt for a specified time. At the end of
the specified time, the prompt closes, which confirms the paper that is loaded. While the prompt appears on the
control panel touch screen, you can confirm any change to the paper type, color, and size.
• A
Auuttoo C
Coonnffiirrm
maattiioonn: This option confirms the paper type, color, and size automatically without showing a
confirmation prompt on the control panel touch screen.
Note: Xerox does not recommend using the Auto Confirmation option unless you always load the tray
with paper of the exact same type, color, and size.
Note: To configure the Automatic Tray Confirmation Prompt, refer to RReeqquuiirreedd PPaappeerr PPoolliicciieess in the
System
Administrator Guide
at
www.xerox.com/office/ALC81XXdocs
C O N F I G U R I N G T R AY S 3 A N D 4 O F T H E TA N D E M T R AY M O D U L E
Trays 3 and 4 in the Tandem Tray Module are high-capacity paper trays. Configure Trays 3 and 4 to support the
paper in use. For details on supported paper sizes, refer to
.
To configure Trays 3 and 4 in the Tandem Tray Module:
Note: Before you make any tray adjustments, compare the paper size to the current Tray 3 and 4
configurations. If the paper size matches the tray configuration, no tray adjustment is needed.
1.
Remove any paper from the tray.
2.
Pinch the guide lock on the front paper guide, then slide the paper guide to the required paper size.
3.
To lock the paper guides into place, release the guide lock.
Note: The paper guides lock into place only at the designated standard paper sizes.
C O N F I G U R I N G T R AY 6
Tray 6 is a high-capacity tray. You can configure Tray 6 to support the paper size that you need. For details on
supported paper sizes, refer to
.
To configure Tray 6:
Note: Before you make any tray adjustments, compare the paper size to the current Tray 6 configuration. If
the paper size matches the tray configuration, no tray adjustment is needed.
206
Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide
