Xerox C3000 Facsimile Reference Manual Download

Page: 218 / 298

Changing/Confirming Communication Information

208

Reference

p.278 “Maximum Values”
“Facsimile Features”, General Settings Guide

Deleting Received and Stored Documents

Use the following procedure to delete documents stored on the hard disk.

Press

[

Change TX / Info

]

Press

[

Print / Delete Stored Reception File

]

Select a file to be deleted, and then press

[

Delete

]

Press

[

Yes

]

To cancel a deletion, press

[

]

. The display returns to that of step

Press

[

Exit

]

twice.

The standby display appears.

Note

❒

You cannot delete a document while another person is previewing or
printing it using a Web Image Monitor or DeskTopBinder.

❒

You can specify and delete multiple documents. For the maximum number
of documents you can specify at one time, see “Maximum Values”.

Reference

p.278 “Maximum Values”

Summary of Contents for C3000











































































































































































































































































































Search results

Summary of Contents for C3000

Reviews:

Related manuals for C3000

Brands by name

Popular brands

Xerox C3000, Facsimile Reference Manual

Search results

Summary of Contents for C3000

Reviews:

Related manuals for C3000

Brands by name

Popular brands