Xerox C230, User Manual, Page: 46 / 194

U Ussiinngg tthhee PPuusshh B Buuttttoonn m meetthhoodd
1. From the home screen, touch Settings > Network/Ports > Wireless > Wi-Fi Protected Setup >
Start Push Button Method .
2. Follow the instructions on the display.
U Ussiinngg tthhee ppeerrssoonnaall iiddeennttiiffiiccaattiioonn nnuum mbbeerr ((PPIIN N)) m meetthhoodd
1. From the home screen, touch Settings > Network/Ports > Wireless > Wi-Fi Protected Setup >
Start PIN Method .
2. Copy the eight-digit WPS PIN.
3. Open a web browser, and then type the IP address of your access point in the address field.
• To know the IP address, see the documentation that came with your access point.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
4. Access the WPS settings. For more information, see the documentation that came with your
access point.
5. Enter the eight-digit PIN, and then save the changes.
C Coonnffiigguurriinngg W Wii--FFii D Diirreecctt
Wi-Fi Direct is a Wi-Fi-based peer-to-peer technology that allows wireless devices to connect directly
to a Wi-Fi Direct-enabled printer without using an access point (wireless router).
1. From the control panel, navigate to Settings > Network/Ports > Wi-Fi Direct .
For non-touch-screen printer models, to navigate through the settings, press OK .
2. Configure the settings.
• Enable Wi-Fi Direct: Enables the printer to broadcast its own Wi-Fi Direct network.
• Wi-Fi Direct Name: Assigns a name for the Wi-Fi Direct network.
• Wi-Fi Direct Password: Assigns the password for negotiating the wireless security when using
the peer-to-peer connection.
• Show Password on Setup Page: Shows the password on the Network Setup Page.
• Auto-Accept Push Button Requests: Lets the printer accept connection requests automatically.
Note: Accepting push-button requests automatically is not secured.
• By default, the Wi-Fi Direct network password is not visible on the printer display. To show the
password, enable the password peek icon. From the control panel, navigate to Settings >
Security > Miscellaneous > Enable Password/PIN Reveal .
• To know the password of the Wi-Fi Direct network without showing it on the printer display,
from the control panel navigate to Settings > Reports > Network > Network Setup Page .
C Coonnnneeccttiinngg aa M Moobbiillee D Deevviiccee ttoo tthhee PPrriinntteerr
Before connecting your mobile device, make sure that Wi-Fi Direct has been configured. For more
information, see
Configuring Wi-Fi Direct .
46
Xerox ® C230 Color Printer
User Guide
Set up, install, and configure