Xerox ApeosPort-III C7600 User Manual Download Page 218

Page: 218 / 369

5 Scan

216

Scan

If a screen that displays [Stop] or [Cancel] does not appear:

Press the <Job Status> button.

Select the job to cancel, and then select
[Stop].

Note

•

If you cancel the job, scanned data stored
in the folder will also be deleted.

Confirming the Scanned Data while Scanning the Document

You can confirm the scanned data while scanning the document.

Important •

When [MRC High Compression] on the [File Format] screen is set to [On], the preview
function is not available.

Note

•

This feature is not provided for some models. An optional package is necessary. For more
information, contact our Customer Support Center.

Select [Next Original] on the touch screen.

Select [Preview]. A preview screen appears
and displays the first page of the last
scanned document.

<Job Status> button

Summary of Contents for ApeosPort-III C7600

















































































































































































































































































































































































Search results

Summary of Contents for ApeosPort-III C7600

Reviews:

Related manuals for ApeosPort-III C7600

Brands by name

Popular brands

Xerox ApeosPort-III C7600, User Manual

Search results

Summary of Contents for ApeosPort-III C7600

Reviews:

Related manuals for ApeosPort-III C7600

Brands by name

Popular brands