Xerox ApeosPort-III C7600, User Manual

Page: 114 / 369

3 Copy
112
Copy
3
„ Off
Adds no prefix text or page number.
„ Bates Stamp
Adds prefix text and page numbers to copies.
„ Stored Prefixes
Allows you to use the screen keyboard to enter prefix text up to 16 characters.
„ Number of Digits
Displays the [Bates Stamp - Number of Digits] screen.
You can select whether to specify the number of digits to be used for page numbers.
Select from [Auto Assign] and [Manual Assign]. If you select [Manual Assign], you can
specify the number of digits between 1 and 9 digits in 1 digit increments.
„ Apply To
Displays the [Apply Bates Stamp To] screen.
Refer to "[Apply Bates Stamp To] Screen" (P.112).
„
Position
Displays the [Bates Stamp - Position] screen.
You can select a prefix and page-number position from six options.
You can also select a stamp position on Side 2 from [Same as Side 1] or [Mirror Side 1].
„ Font Size
Displays the [Bates Stamp - Font Size] screen.
You can select a prefix and page-number size from three options, or can directly
specify a size in the range of 6 to 24 points in 1 point increments.
[Apply Bates Stamp To] Screen
This screen allows you to specify a page range to add prefix text and page numbers.
1
Select any item.
„ All Pages
Adds prefix text and page numbers to all pages.
„ Starting Page Number
Allows you to specify the start page to add prefix text and a page number, in the range
of 1 to 9999.
Note • Use [ ] and [ ], or the numeric keypad and enter the start page number.